[Cialug] ML330

[L. V. Lammert]

On Sun, 16 Sep 2012, Hasler, Chris wrote:

> HP ProLiant servers with SmartArray controllers use the Linux cciss
> driver module.  In a working system, typically you should see the array
> as /dev/cciss/c0d0 with /dev/cciss/c0d0p1 as your boot partition.   So
> if you are seeing /dev/sda1 you don't have the Smart Array driver
> working properly and the server is just seeing one of the hard disk.
>
Indeed, .. I do not want to spend any more time fooling with SmartArray,
especially since supports RAID10.

What is needed is the 'trick' to getting the system to boot to /dev/sda.

Thoughts?

	Thanks!

	Lee