[Cialug] perc 6/e battery placement

[Josh More]

Rubber band?

Hot Glue?


Josh More | Senior Security Consultant - CISSP, GIAC-GSLC Gold, GIAC-GCIH
Alliance Technologies | www.AllianceTechnologies.net
400 Locust St., Suite 840 | Des Moines, IA 50309
515.245.7701 | 888.387.5670 x7701

Blog: Not The Usual Security Predictions: 2011
http://www.alliancetechnologies.net/blogs/morej

How are we doing? Let us know here:
http://www.alliancetechnologies.net/forms/alliance-technologies-feedback-survey

________________________________________
From: cialug-bounces at cialug.org [cialug-bounces at cialug.org] on behalf of Barry Von Ahsen [barry at vonahsen.com]
Sent: Friday, February 04, 2011 16:22
To: Central Iowa Linux Users Group
Subject: [Cialug] perc 6/e battery placement

I've got a perc 6/e card like here:

http://public.support.unisys.com/pcproducts/esx/docs/DellDocs5.4/en/Perc6i_6e/chapterd.htm#wp1063488


but the plastic placeholder for the BBU won't fit over the battery - so
where does the battery go?  it could balance if it was vertical, but
since it's laying down, and the battery is on the bottom, it would fall
through.  the battery is the exact same size as the plastic bit, but has
no clips, so what attaches the battery to the dimm?

did dell send the wrong stuff? (I know, that'd be a first)


pics for clarity:
http://vonahsen.com/perc/20110204_001.jpg
http://vonahsen.com/perc/20110204_002.jpg
http://vonahsen.com/perc/20110204_003.jpg
http://vonahsen.com/perc/20110204_004.jpg

-barry

_______________________________________________
Cialug mailing list
Cialug at cialug.org
http://cialug.org/mailman/listinfo/cialug