[Cialug] Optical Drive Won't Boot

[Todd Walton]

On 3/30/09, jrnosee at gmail.com <jrnosee at gmail.com> wrote:
> I've had issues using cable select on the drives.  Try setting the jumpers
> to proper master/slave as well if you haven't already.  Also, if you have it
> set this way, try cable select for the heck of it...somethings work for some
> and not others!

I tried using cable select on both drives, and I tried setting the
jumper specifically to master or slave, and swapped the drives and
adjusted the jumpers.

-todd