[Cialug] MegaRAID Monitoring

[Bailey, Jonathan C]

Yes. Still shrink wrapped. Next up is replacement.. Now if only IPMI was =
working...



Jon

-----Original Message-----
From: cialug-admin@cialug.org [mailto:cialug-admin@cialug.org]On Behalf
Of Jon Clemons
Sent: Monday, April 18, 2005 5:46 PM
To: cialug@cialug.org
Subject: Re: [Cialug] MegaRAID Monitoring


Slow beats nothing which is what you had to begin with:)
I pointed you at what I knew would give you what you were asking for
and in your request you did not say speed was one of the requirements.
If it clicks it needs replaced.
You bought a 9 gb drive new??


----- Original Message -----=20
From: "Bailey, Jonathan C" <bailj0@bp.com>
To: <cialug@cialug.org>
Sent: Monday, April 18, 2005 5:37 PM
Subject: RE: [Cialug] MegaRAID Monitoring


Opps.. Forgot about it actually. I downloaded it from LSI and it works =
great=20
(well, a bit slow, but still). I was having issues with a drive clicking =

once in a while and performance dropping a bit. Here's the only drive =
that=20
has any errors (and its new). Think I should replace it?


Capacity      :  8727MB
Vendor ID     :  WDIGTL
Product ID    :  WDE9180 ULTRA2
Revision      :  1.30
No Predictive Failures
Media Errors 0
Other Errors 8

-----Original Message-----
From: cialug-admin@cialug.org [mailto:cialug-admin@cialug.org]On Behalf
Of Jon Clemons
Sent: Monday, April 18, 2005 5:25 PM
To: cialug@cialug.org
Subject: Re: [Cialug] MegaRAID Monitoring


What's wrong with using megamgr?

----- Original Message -----=20
From: "Bailey, Jonathan C" <bailj0@bp.com>
To: <cialug@cialug.org>
Sent: Monday, April 18, 2005 5:20 PM
Subject: RE: [Cialug] MegaRAID Monitoring


mdadm doesn't do anything (megaraid is HW RAID, md is the soft RAID).
raidtools2 happens to be more utilities for the same..


Jon


-----Original Message-----
From: cialug-admin@cialug.org [mailto:cialug-admin@cialug.org]On Behalf
Of David Champion
Sent: Monday, April 18, 2005 5:09 PM
To: cialug@cialug.org
Subject: Re: [Cialug] MegaRAID Monitoring


Bailey, Jonathan C wrote:
> (ok, I know i posted this earlier, but here is a reworded repost)
>
> I've got a drive in a megaraid array that I believe is failing. =
According
> to the array stats, the drive is fine. Is there any way to check per =
drive
> error rates, etc in an array on a live system?

Have you tried mdadm or raidtools?

-dc



_______________________________________________
Cialug mailing list
Cialug@cialug.org
http://cialug.org/mailman/listinfo/cialug
_______________________________________________
Cialug mailing list
Cialug@cialug.org
http://cialug.org/mailman/listinfo/cialug


_______________________________________________
Cialug mailing list
Cialug@cialug.org
http://cialug.org/mailman/listinfo/cialug
_______________________________________________
Cialug mailing list
Cialug@cialug.org
http://cialug.org/mailman/listinfo/cialug


_______________________________________________
Cialug mailing list
Cialug@cialug.org
http://cialug.org/mailman/listinfo/cialug